Skip to content

What Is IPTV? A Plain-English Guide to Internet TV

Published 6 min read
Fibre-optic cables plugged into network equipment in a dark server rack

Part of our IPTV Buying Guide series. Compare subscriptions, plans and connections, and test a free trial properly.

IPTV is television delivered over the internet. Instead of arriving through an aerial, a satellite dish or a cable line, channels and videos travel to your device as data over your broadband, and an app turns that data back into a picture. That is the whole idea. The rest of this guide fills in the detail: how it works, what you get, what you need and the terms you will meet along the way.

Broadcast vs on request

Traditional TV is broadcast: one signal goes out, and every aerial or dish in range can pick it up, whether anyone is watching or not. IPTV works on request. When you open a channel, your device asks a server for that stream, and the server sends it just to you. IPTV stands for Internet Protocol Television, after the Internet Protocol, the common language every connected device uses to send and receive data.

The practical upshot: anything with an internet connection and a suitable app can be a TV. A smart TV, a streaming stick, a phone, a tablet or a laptop all work, and there is nothing to install on the roof.

A channel's journey to your screen

Each time you press play, four stages happen in a fraction of a second:

  1. Capture and compress. The channel's feed is converted into a compressed digital format. Raw video is far too large to send over home broadband, so codecs such as H.264 and H.265 (HEVC) shrink it while keeping it sharp. H.265 needs roughly half the data of H.264 for similar quality, which is why it is common for 4K.
  2. Cut into segments. The video is split into short chunks, often a few seconds each, usually in several quality levels. Formats such as HLS and MPEG-DASH let a player fetch chunk after chunk and switch quality if your connection changes.
  3. Serve. The chunks sit on streaming servers, ideally spread across several locations so viewers reach a nearby one and no single machine gets overloaded.
  4. Buffer and play. Your player downloads a few seconds ahead, keeps them in a buffer, decodes them and shows the picture. The buffer is what carries you through brief dips in your connection, and it is also why streams run a few seconds behind a traditional broadcast.

Alongside the video, the service supplies a channel list, an on-demand library and an electronic programme guide, which your player assembles into a familiar TV-style screen. When the buffer runs out faster than it refills, you see buffering; our buffering guide explains how to stop it.

What you get

  • Live TV: channels playing in real time, including news, entertainment and live sport.
  • Video on demand: films and series you start, pause and resume whenever you like. See our guide to IPTV movies and series.
  • Catch-up: recent programmes on supported channels that you can replay after they air.
  • A programme guide (EPG): what is on now and next, laid out like a TV listings grid. Our EPG guide explains how it works.

What you need

  • Broadband: allow at least 15 Mbps per screen for HD and Full HD and 30 Mbps or more for 4K. Stability matters as much as speed, so a cable or strong 5 GHz Wi-Fi works best.
  • A device: almost any modern screen. Our supported devices page shows the options and what to check before buying one.
  • A player app: the app that shows the channels, guide and library. Many are free. See how to choose a player app.
  • A subscription: sold by plan length and by the number of screens that can play at once, called connections.

How you log in

  • Xtream Codes: a server address, username and password. It loads live TV, the library and the guide together, and is the easiest option in most players.
  • M3U playlist: a link to a channel list that works in almost any player, sometimes with a separate guide link.
  • Portal and MAC address: used by set-top boxes such as MAG, where the service is linked to the box's hardware address.

Our setup and support page shows each method on every common device.

Two kinds of IPTV

Managed IPTV is run by a broadband company over its own private network, usually with its own box, and only works with that provider. Internet (over-the-top) IPTV travels over the public internet to any compatible device on any broadband. When people talk about an IPTV subscription today, they almost always mean the second kind.

How it compares

With cable and satellite

Cable and satellite use dedicated infrastructure and the operator's box, often on long contracts, and satellite works with no internet at all. IPTV needs only broadband, runs on many devices and usually comes on shorter plans; the trade-off is that it depends on your connection. Our honest comparison scores them category by category.

With streaming apps

Subscription streaming apps also use the internet, so the technology is similar. The difference is focus: most are built around an on-demand library, while an IPTV service is built around live channels on a schedule, with on-demand and catch-up alongside. Plenty of homes use both.

Strengths and limits

Strengths

  • No dish, aerial or engineer visit.
  • Works on screens you already own, at home and away.
  • Live channels, on demand and catch-up in one app.
  • Several screens at once, depending on your plan.
  • Flexible plan lengths instead of long contracts.

Limits

  • Picture stability depends on your broadband and home network.
  • Streams run a few seconds behind live broadcasts.
  • Quality varies a lot between providers, so testing first matters.

IPTV is simply a delivery method, used by broadband companies, broadcasters and streaming platforms worldwide. Whether a particular service is lawful depends on whether it holds the rights to what it offers, and the rules vary by country. You are responsible for making sure the services you use are permitted where you live, and a reputable provider says so in its terms.

Jargon decoded

  • Bitrate: how much data per second the picture uses; higher is usually sharper.
  • Buffer: the few seconds of video your player loads ahead.
  • Catch-up: replays of recent programmes on supported channels.
  • Codec: the compression method, such as H.264 or H.265.
  • Connection: one stream playing at a time.
  • EPG: the electronic programme guide.
  • VOD: video on demand, the films and series library.

Getting started

  1. Run a speed test on the device you will watch on, ideally in the evening.
  2. Install a player app on that device.
  3. Request a free trial and follow our 24-hour trial test plan.
  4. Compare plans by length and connections using our 12 questions to ask before buying.
  5. Set up favourites and the guide so everyday viewing is quick.

If you want to see it working in your own home, BRIX IPTV offers a 24-hour free trial on WhatsApp, with no payment details needed.

Frequently asked questions

What does IPTV stand for?

Internet Protocol Television: TV channels and video delivered over an internet connection instead of an aerial, dish or cable line.

Do I need a special box?

No. A smart TV, streaming stick, phone, tablet or computer with a player app is enough. Set-top boxes are an option, not a requirement.

What internet speed do I need?

At least 15 Mbps per screen for HD and Full HD and 30 Mbps or more for 4K.

Is IPTV the same as a streaming app?

Both use the internet. Streaming apps focus on on-demand libraries; IPTV is built around live channels, with on demand and catch-up alongside.

Ready to Start Streaming with BRIX IPTV?

Live TV, sport, films and series on every screen, with activation in minutes and a 24-hour free trial.